PART 3 HOW TO CEILING FAN WIND TURBINE

May 15, 2011 by  
Filed under Wind and Solar

THIS IS A VIDEO TO SHOW THOSE WHO DONT WANT TO SPEND A LOT OF MONEY FOR THE BIG SYSTEMS OUT THERE. THE BLACK UNIT IN THE BACK GROUND IS THE ONE THAT IM MAKING FOR A FRIEND WHO WILL USE IT WITH GREAT GLADNESS. HIS ELECTRICAL SYSTEM WAS ALMOST COMPLETELY DESTROYED BY LIGHTENING. IT WOULD COST TOO MUCH FOR REPAIRS AND NEW DEPOSITS AND OLD BILL TO RECONNECT, ESPECIALY WITH REPAIRS FOR A NEW SERVICE BOX AND UPDATING TO A BREAKER SYSTEM AND THE WIRES DESTROYED IN THE HOUSE. ALTHOUGH THIS UNIT WILL NOT NORMALLY SUPPLY A NORMAL HOUSE HOLD IT WILL ALLOW HIM TO HAVE LIGHTS , RADIO, TV , CELLPHONE CHARGING, AND A FEW MORE THINGS BUT NOT ALL AT ONCE OR CONSTANTLY. BUT 20 DOLLARS A DAY FOR GAS IN A GENERATOR IS NOT AN OPTION EITHER. A BAG OF ICE, AND A COOLER IS. WE ARE MAKING A SOLAR HOT WATER HEATER AS WELL. BY 1:00 PM HE WILL HAVE ENOUGH WATER TO DO DISHES AND GET A NICE HOT SHOWER. THEN RELAX BY THE TV OR RADIO FOR A FEW HOURS ON STORED ENERGY. THEN GO TO SLEEP WITH A SMILE. IF HE GETS UP IN THE NIGHT HE CAN JUST TURN ON THE LIGHT. AND ITS ALL FREE. I HAVE ONE CONFESSION TO MAKE ABOUT THE ONE IN THE FIRST VIDEO THAT EVERYONE HAS COMPLEMENTED ON FROM THE BEGINNING. THAT IS , THAT THE ONE THAT IS IN THE VIDEO IS THE 7th OR 8th ONE I DID. I DID IT FOR SOMEONE ELSE BUT I DESTROYED ONE OF THE COIL SETS IN IT BY PULLING ON THE WIRES TO HARD WHILE I WAS RETHREADING THE WIRES TO COME OUT THE OTHER SIDE. BUT THE 12 VOLT SYSTEM INSTEAD OF 24 VOLT SYSTEM WILL NOT SLOW THE BLADES DOWN WHEN

Website Pin Facebook Twitter Myspace Friendfeed Technorati del.icio.us Digg Google StumbleUpon Premium Responsive

Comments

25 Responses to “PART 3 HOW TO CEILING FAN WIND TURBINE”
  1. muddymuddymuddmann says:

    Hey Mark good to hear from you. and thanks for the compliments.
    Happy new year.
    MUDDy

  2. ainzdreamangel says:

    Hi muddymuddymuddmann…

    can it charge the ups 240 volt AC…

  3. 0nlymenotu says:

    Great video I’ve got a 3 amp ceiling fan motor. I’m going to convert using a iron-steel based magnet.I don’t expect this to be a real power house… but I’m considering building a 1kw pma stater,,,, if all things were equal..would there be any output differance between say a n35 ,n42 ,n50 -n52…at what point does the cost out way the gain?…… again great videos… keep expiring the people!! πŸ™‚

  4. muddymuddymuddmann says:

    n-42 to 50 is a good point on these small units. On the larger units that produce 500 or better i’de use the best your pocket allows. The best part of the wind is , when the load is on the alternator it slows down a little. the wind keeps a constant pressure or torque on the rotation of the alternator. the speed it turns in a certain wind speed is inversely proporsionate to the load.
    Thats as long as the wind is trying to spin the prop faster than the rpms that produce the battery bank voltage

  5. muddymuddymuddmann says:

    YES! you will need a ceiling fan from a country that uses 240 volts as a household current. In the United States we use 120 volts. so mine can do 120 and ive seen 180.
    If I re-arrange the diodes I can double the voltage as well.
    MUDDy

  6. StephieLockdown says:

    how can you tell what is the north or south?

  7. muddymuddymuddmann says:

    it doesn’t matter which one you start with as long as the poles alternate for each coil.
    MUDDy

  8. superbri007 says:

    How do you attach the magnets.

  9. muddymuddymuddmann says:

    @superbri007 NORTH OVER ONE COIL AND SOUTH OVER THE NEXT COIL, AND REPEAT UNTIL ALL COILS ARE COVERED. THE SMALLER DIAMETER MAGNETS WE USE GO SIDE BY SIDE SO THE CURVE DOESNT LEAVE A GAP UNDER THE MIDDLE OF THE MAGNETS. THE MAGNETS ONLY COVER HALF OF A COIL, SO WE USE 2 NORTHS, AND 2 SOUTHS, 2 NORTHS, 2 SOUTHS, ECT….
    MUDDy

  10. lloyd21964 says:

    Hey Muddy, I have been working on a larger alternator and have a question that you may be able to answer. LOL, I am using 2x1x.5 neo’s but have read that when you wind your coils, the coils should not exceed the width of the magnet. If your coils were a little larger could you use ferrite or samarian magnets that are a little larger for a base or in conjunction with the smaller neo magnet, I know this is not exactly connected to your video production gallery, but I trust your insight.
    Lloyd πŸ™‚

  11. muddymuddymuddmann says:

    @lloyd21964 IT SOUNDS LIKE AN AXIAL FLUX ALTERNATOR. CHECK OUT OTHERPOWER . COM (THE HOME BREW WIND TURBINE EVOLUTION). SCROLL DOWN THE LIST UNTILL YOU SEE THE ONE CLOSEST TO YOURS, AND CLICK THE here BUTTON FOR THAT ONE. AND INSIDE THAT PAGE YOU WILL FIND A WELTH OF INFO. THE SIZE OF THE COILS, HOW MANY WRAPS AND WHAT SIZE WIRE USED, PLUS THE OUTPUTS IN DIFFERENT WINDS. ENJOY.
    MUDDy

  12. alphafirstoneyou says:

    1940 cieling fan. how but a 2010 cieling fan

  13. muddymuddymuddmann says:

    @alphafirstoneyou Ha Ha! THANKS! THESE ARENY THAT OLD. BUT I DO THINK THE OLDER ONES PUT OUT MORE. THE CASES ARE THICKER AS WELL.
    THE WIRING SYSTEM IS STILL 2 PHASE POWER. THE CAPACITORS MAKE THE PHASE SHIFT OF 90 DEGREES FOR THE SECOND COIL SET. EITHER WAY. WE USE THEM FOR POWER GENERATION OR JUST A COOL WEEKEND PROJECT. HOPE YOU ENJOY.
    MUDDy

  14. alphafirstoneyou says:

    @muddymuddymuddmann thanks muddy, you videos are good.

  15. muddymuddymuddmann says:

    @alphafirstoneyou THANK YOU
    MUDDy

  16. JimmyLindstr0m says:

    best effin video producer of all in YT!

  17. muddymuddymuddmann says:

    @JimmyLindstr0m THANKS, I HAVE A FEW MORE HOURS OFF WORK NOW THAT THE SEASON IS GETTING COLDER. THAT MEANS I’M FIXING TO START DOING THE REST OF THE VIDEOS AND A NEW DUAL MAGNET ROTOR AXIAL FLUX ALTERNATOR FOR A TEN FOOT PROP WIND TURBINE. WWWWEEEEE!
    MUDDy

  18. babblake1 says:

    Good production , you in the movie bus.? Iwould buy video of more of this work.

  19. perplexfraction says:

    The time has come for Free energy to be revealed ,But the Oil coporations life depends on covering this up,Get a REAL working magnet motor at LT-MAGNET-MOTORdotCOM ,Join the revolution!

  20. muddymuddymuddmann says:

    @babblake1 THANKS FOR THE COMPLIMENT! NOT REALY IN THE MOVIE BUSINESS. BUT I WILL MAKE A DVD OF THE CEILING FAN WIND TURBINE CLASS VIDEOS AND SELL IT FOR CHEAP SO SOME ONE DOESNT NEED THE COMPUTER TO SHOW A FRIEND ACROSS TOWN. IF YOU ARE A SUBSCRIBER, I WILL SHOW A VIDEO ON THE DVD WHEN IT IS READY.
    MUDDy

  21. bnewton81 says:

    you obviously know what you are talking about, but the problem as with any technical subject is getting that knowledge to the ppl that don’t know.

  22. muddymuddymuddmann says:

    @bnewton81 4000 COMBINED VIEWS A DAY HELPS, BUT IT IS FAR FROM WHERE I WANT IT TO BE. THE ONES THAT NEED IT MOST DONT HAVE ACCESS TO THE WEB MUCH. I WOULD LOVE TO TRAVEL AROUND THE WORLD AND INSTALL FREE ENERGY TO 3RD WORLD COUNTRIES WITH LITTLE TO NO ELECTRICITY. JUST A DREAM MAYBE, BUT A GOOD ONE THAT I HOPE TO SEE COME BY.
    TNX.
    MUDDy

  23. bnewton81 says:

    @muddymuddymuddmann Give it some thought, but I bet that you could get a grant from the government to do just that. Even in these trying times. One man can change the world.

  24. reverendzombie72 says:

    What type of magnets do I need? Where can I get them?

  25. muddymuddymuddmann says:

    @reverendzombie72 ALLIED MAGNETS HAS A DECENT DEAL ON THE 1/2 INCH BY 1/8th INCH ROUND DISK MAGNETS.
    MUDDy

Speak Your Mind

Tell us what you're thinking...
and oh, if you want a pic to show with your comment, go get a gravatar!